Pinpoint Chips for Tap-Ins

Set up 10 piles of balls in two lines of 5 piles, 6 yards/meters between lines, 4 yards/meters between piles.

Put the piles on grass, not on the green, between 5 and 30 yards/meters from the hole.

Mark 3 clear target zones around the hole, spaced evenly.

Hit 36 chip shots: 12 to Target Zone 1, 12 to Target Zone 2, and 12 to Target Zone

Always chip from the piles; for each set of 12 shots, pick any piles but only aim at the assigned zone.

After each shot, check if the ball stops inside the right target zone; count as success if it does.

Finish all 36 shots, then count total successes inside the right zones out of 36 attempts and enter this score in the app.

Set up 10 piles of balls in two lines. Each line has 5 piles. The lines are 5 to 10 yards apart. Each pile in a line is 4 yards apart.

Put the piles 5 to 30 yards from the hole on any type of grass.

On the green, make 4 quadrants with string or tees. Each quadrant is about 6 feet wide.

Hit 36 chip shots. Hit 9 shots to each of the 4 quadrants.

Choose a pile and chip 9 balls, aiming for one quadrant.

After 9 shots, switch to the next quadrant. Do this for all 4 quadrants.

A chip that stops inside the right quadrant counts as a success.

After 36 shots, count how many balls stopped in the target quadrants and enter your score in the app out of 36 attempts.

Put 40 balls into 8 lines. Each line has 5 balls. Lines should be about 1 yard or meter apart. Put these lines anywhere on the grass 5 to 30 yards/meters from the hole but not on the green.

On the green, use sticks, clubs, or string to mark 3 landing zones in a straight line about 6 feet (2 meters) apart.

Divide the 36 chip shots into 3 sets of 12 shots.

For each set, pick 3 lines of balls and aim every shot at one landing zone.

Hit 5 chips from each line to the chosen zone. After 3 lines (15 shots), change zones until all 36 shots are done.

Count each shot that lands and stays in the target zone as a success.

Enter the total number of successful shots in the app, out of 36 attempts.

Set up 10 piles of 4 balls each in two rows. Each row has 5 piles.

Keep piles about 2 meters apart, rows 5–10 meters apart.

Place piles 5–30 meters from the hole, not on the green.

Mark two circles around the hole on the green: a small one (2 meters out) and a big one (5 meters out).

Take turns hitting balls from different piles, trying to stop balls in the circles.

Hit 36 balls total: 18 try for the small circle, 18 for the big circle.

Count how many balls finished in each circle.

Add these for a score and enter your total out of 36 tries.

Set up 36 balls in 2 lines of 18 balls each, 5 to 10 yards apart, on grass 5 to 20 yards from the hole.

Mark 9 stop zones in a 3 x 3 grid on the green, spaced apart so the zones are clear.

Chip 4 balls to each stop zone, alternating between the two lines. For each zone, hit 2 balls from one line, then 2 from the other.

Keep doing this until you have hit 4 balls for each zone, for a total of 36 shots.

Count a shot as a success only if the ball stops in the right zone.

Add up the number of successes out of 36 attempts and enter the score in the app.

Set up 4 rows of balls. Each row has 9 balls, 1 foot apart.

Space the rows 5 yards apart on grass, between 5 and 30 yards from the hole.

Put 3 targets by the hole: A at 12 o'clock, B at 4 o'clock, C at 8 o'clock, each 3 feet from the hole.

Split the 36 shots into 3 groups of

First 12 shots go to Target A, next 12 to Target B, last 12 to Target C.

From each row, chip the ball to try to stop it close to the chosen target. Ball setup does not change.

After 12 shots at one target, switch to the next target. Repeat until all 36 shots are finished.

Each ball that stops within 2 feet of the target is a success.

Count how many successes you had and enter your score in the app out of 36 attempts.