Pinpoint Chips for Tap-Ins

Put 36 balls into 6 piles of 6 balls on the grass, between 5 and 30 yards from the hole.

Place 3 flags or targets on the green, 6 feet apart in a line.

Split the 36 balls into 3 groups of 12 shots.

Hit the first 12 balls to the first flag and try to stop each ball within 10 feet of it.

Hit the next 12 balls to the second flag, trying to stop them within 10 feet.

Hit the last 12 balls to the third flag, again aiming to stop within 10 feet.

Switch which pile you use each time to practice different distances and grass.

Count every ball that stops within 10 feet of its flag as a successful shot.

Add up successful shots out of 36 and enter score in the app.

Place 36 balls in two lines that cross, with 18 balls in each line.

Keep the balls about 1 foot apart, with lines set up 5 to 30 yards from the hole.

On the green, divide a 6-foot circle around the hole into 4 equal parts.

Split the 36 chip shots into 4 groups of 9 balls.

Aim the first 9 shots at the first part of the circle.

Switch to the other line and aim the next 9 balls at the second part. Keep switching lines and aim at the next parts until all 36 balls are chipped.

Count how many balls land in the right part each time.

Enter the number of successful chips out of 36 attempts in the app.

Set up 10 piles of balls in two lines. Each line has 5 piles. Lines are 8 yards apart. Piles in each line are 3 yards apart.

Place the piles on grass between 5 and 30 yards from the hole. Keep the same setup.

On the green, mark 9 stop zones using buckets, string, or tees. Zones cover different short chip targets.

Take 36 chip shots in total. Chip 4 balls to each of the 9 zones.

For each shot, chip from any pile. Try to stop the ball in the assigned zone. Chip 4 balls to one zone before moving to the next.

Count each ball that stops in the correct zone as a success.

After 36 shots, count how many were successful. Enter your score out of 36 in the app.

Put 36 balls into 9 piles. Each pile has 4 balls. Put piles 5 to 30 yards from the hole.

Mark 9 target zones on the green.

Try to hit 4 balls into each zone. Do this for all 9 zones.

Always use the same ball setup. Only change which zone is the target.

Count each ball that stops inside the correct zone.

Add up all the successful shots out of

Enter score in the app, out of 36 attempts.

Set up 4 lines of 9 balls each, 1 foot apart.

Put the lines on grass 5-20 yards/meters from the hole, not on the green.

On the green, make 4 quadrants using string or tees, each about 6 feet in radius.

Hit 36 chip shots in total, 9 to each quadrant.

Start at any ball line and chip 9 balls, aiming for Quadrant

Move to the next line and chip 9 balls to Quadrant

Do the same for Quadrants 3 and 4, 9 balls each.

Count each ball that stops in the target quadrant.

Add up the number of successful shots and enter the total out of 36 attempts.

Make 9 stop zones on the green. Mark them with tees, string, or buckets. Line up or put them in a grid.

Put 36 balls in 4 rows. Each row has 9 balls, spaced 1 foot apart. Put the rows about 5 yards apart on the grass, between 5 and 20 yards from the green.

Plan to hit 4 balls at each of the 9 stop zones. That is 36 shots.

Start at any row of balls. Hit balls, trying to stop each one in the first stop zone.

After 4 tries at the first zone, go to the next zone and do the same. Keep going until you try all 9 zones.

Count a shot as a success if the ball stops completely inside the target zone.

When all shots are done, count the number of successful shots and enter the score in the app, out of 36 attempts.

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.

Make two crossing lines with 18 balls in each line.

Put the balls 1 foot (30 cm) apart on grass, 5 to 20 yards/meters from the hole.

Place 2 flags on the green. The flags should be 5 to 10 yards/meters apart.

Hit 18 balls from the first line. Try to land each ball within 10 feet (3 meters) of the first flag.

Move to the second line. Hit 18 balls trying to land each within 10 feet (3 meters) of the second flag.

Count how many balls stop inside the 10-foot (3-meter) circle near each flag. Enter the score in the app out of 36 attempts.

Set up 3 landing zones on the green, 6 feet apart in a straight line.

Place 3 piles of balls around the chipping area, each pile randomly 5 to 30 yards from the hole. Keep this setup the same.

Divide 36 chip shots into 3 groups of

For the first 12 shots, aim for the first landing zone from any pile.

For the next 12 shots, aim for the second landing zone from any pile.

For the last 12 shots, aim for the third landing zone from any pile.

Count each shot that lands and stays in the correct zone as a success.

Total the successful shots out of 36 and enter the score in the app.