Lag it close: can you control your rollout every time?

Set up 9 piles of 4 balls each, spread between 1 and 10 yards from the green and 5 to 30 yards from the hole.

Mark 9 stop zones on the green using tees, string, or small buckets.

Do 36 bump-and-run shots, 4 shots at each of the 9 stop zones.

From any pile, hit 4 shots to the first stop zone.

Do the same for the other stop zones, always 4 shots per zone, using the original ball setup.

Count shots that stop inside the right stop zone.

Add up how many shots were successful, and enter this number out of 36 attempts.

Put 40 balls in 8 lines of 5 balls each around the green. Lines should be about 1 yard/meter apart and placed 1 to 10 yards/meters from the green and 5 to 30 yards/meters from the hole.

On the green, mark two circle zones around the hole: one with a 6-foot (2 meter) radius and another with a 15-foot (5 meter) radius.

Hit 36 bump-and-run shots—first 18 shots aiming for the small inner circle, then 18 shots aiming for the bigger outer circle.

Use any line of balls. Hit shots for the inner circle for 18 attempts, then switch to hitting shots for the outer circle for another 18 attempts. Change lines as wanted.

Count each ball that stops in the circle aimed for as a success.

After all 36 shots, add the number of successful shots out of 36 and enter your score in the app.

Place two lines of 18 balls each near the green. Balls are 1 foot apart. Lines are 5 to 10 yards apart.

On the green, make a circle around the hole (6 feet radius) and divide it into 4 equal quadrants with string or markers.

Hit 36 bump-and-run shots total, 9 shots at each quadrant.

For each set of 9 shots, aim to stop the ball inside one chosen quadrant.

Hit 4 or 5 shots in a row from one line, then switch to the other line and finish the 9 shots for that quadrant.

After 9 shots to one quadrant, move to the next quadrant and repeat the routine until all 4 quadrants have been used.

Count each ball that stops in the right quadrant as a success.

After all 36 shots, add up successful shots in the intended quadrants and enter score in the app, out of 36 attempts.

Put 36 balls into 6 piles of 6 balls each around the chipping area, between 1 and 10 yards from the green, and 5 to 30 yards from the hole.

On the green, make two rings around the hole with string or tees: a small ring with a 6-foot radius and a bigger ring with a 15-foot radius.

Split your shots into two groups of

For the first 18 shots, try to land the ball inside the small ring (6-foot radius).

For the next 18 shots, try to land the ball inside the big ring but outside the small ring.

Hit one ball at a time from any pile. Do 18 shots for the first target, then do 18 shots for the second target.

Count every ball that stops inside the target ring as a success.

After all 36 shots, add up how many landed in the right rings and enter your score in the app, out of 36 attempts.

Place two parallel lines of balls beside the green. Each line has 18 balls spaced 1 foot apart. The lines are 5 to 10 yards apart.

On the green, mark 9 stop zones using tees, string, or buckets. Arrange the zones in 3 rows of 3, spaced evenly.

Hit 36 bump-n-run shots. Divide them into 9 groups of 4 shots.

Hit 4 shots from one ball line toward Stop Zone

Try to stop each ball in that zone.

Switch to the other ball line and hit 4 shots toward Stop Zone

Keep switching ball lines and hit 4 shots at each stop zone in order (Zone 1 to Zone 9).

Count every ball that stops in the right stop zone as a success.

Add total successful stops and enter the score in the app, out of 36 attempts.