Avoid 3-Putt: Chip Inside Circle

Put 36 golf balls into 3 piles of

Place each pile 5 to 20 yards from the hole.

At the green's edge, set up 3 target zones in a line, each 4 feet apart. Mark them Zone A (closest), Zone B (middle), and Zone C (farthest).

Keep ball positions the same: first pile on a slope above feet, second pile on flat ground, third pile on a slope below feet.

Hit 12 chip shots to Zone A from the above feet position.

Hit 12 chip shots to Zone B from the flat position.

Hit 12 chip shots to Zone C from below feet position.

Count how many shots land and stay in the intended zone.

Add up total successful shots out of 36 and enter the score in the app.

Set up 3 target zones on the green, 5 feet apart in a straight line from closest to farthest from the hole.

Place balls at the edge of the fairway on two slopes: uphill and downhill, each about 15 yards from the hole.

Hit 18 chip shots from the uphill slope and 18 chip shots from the downhill slope.

For each slope, hit 6 shots to each zone, in order.

Start with the uphill slope: hit 6 shots to Zone 1, then 6 to Zone 2, then 6 to Zone

Move to the downhill slope: hit 6 shots to each zone in order.

Count a shot as successful if the ball stops inside the target zone.

After all shots, count your total successful shots and enter your score in the app out of 36 attempts.

Set up 10 piles of 4 balls each in two rows. Each row has 5 piles.

Keep piles about 2 meters apart, rows 5–10 meters apart.

Place piles 5–30 meters from the hole, not on the green.

Mark two circles around the hole on the green: a small one (2 meters out) and a big one (5 meters out).

Take turns hitting balls from different piles, trying to stop balls in the circles.

Hit 36 balls total: 18 try for the small circle, 18 for the big circle.

Count how many balls finished in each circle.

Add these for a score and enter your total out of 36 tries.

Place 36 balls in two lines of 18 each. Put lines 5 to 10 meters apart. Balls in each line are 30 cm apart.

Mark two circles on the green: a small circle with 2 meter radius and a big circle with 5 meter radius around the hole.

Divide the 36 balls into 2 sets of

First set: chip from first line aiming for the small circle.

Second set: chip from second line aiming for the big circle.

Hit 3 to 5 shots from one line, then switch lines, to keep consistent.

Each ball stopping inside the correct circle for that set is a success.

Count successful balls in the right circles and enter score in the app, out of 36 attempts.

Make two piles of balls for each player between 5 and 30 yards from the hole, anywhere in the chipping area, on any surface.

On the green, make two bullseye zones around the hole: inner circle with 6-foot radius and outer ring from 6 to 15 feet.

Each player hits 36 chips: 18 from each pile.

Try to stop the ball in the inner bullseye (best), then outer bullseye (good), or avoid missing both (bad).

Switch piles after 18 shots, finish all 36 shots.

Count how many balls stop in the bullseye zones.

After 36 shots, record the number of balls in the bullseyes as your score. Enter this total in the app out of 36 attempts.

Put 3 target zones on the green, 6 feet apart in a line to the hole.

Set up two groups of balls for each player in the rough: one with balls above feet, one with balls below feet, from 5 to 30 yards away.

Hit 36 chip shots: 18 to the first target, 18 to the second target.

First, hit 18 shots from above feet to the first target.

Then, hit 18 shots from below feet to the second target.

Count a shot as a success if the ball stops inside the target zone.

Do not move the balls; only change target when needed.

Add your successful shots out of 36 and enter the score in the app.