Thread Needle: Narrow Landing Zone

Set up 36 balls in 2 lines of 18 balls each, 5 to 10 yards apart, on grass 5 to 20 yards from the hole.

Mark 9 stop zones in a 3 x 3 grid on the green, spaced apart so the zones are clear.

Chip 4 balls to each stop zone, alternating between the two lines. For each zone, hit 2 balls from one line, then 2 from the other.

Keep doing this until you have hit 4 balls for each zone, for a total of 36 shots.

Count a shot as a success only if the ball stops in the right zone.

Add up the number of successes out of 36 attempts and enter the score in the app.

Set up 4 lines of 9 balls each, 1 foot apart.

Put the lines on grass 5-20 yards/meters from the hole, not on the green.

On the green, make 4 quadrants using string or tees, each about 6 feet in radius.

Hit 36 chip shots in total, 9 to each quadrant.

Start at any ball line and chip 9 balls, aiming for Quadrant

Move to the next line and chip 9 balls to Quadrant

Do the same for Quadrants 3 and 4, 9 balls each.

Count each ball that stops in the target quadrant.

Add up the number of successful shots and enter the total out of 36 attempts.

Mark 4 areas on the green with string or tees. Each area should be a circle about 6 feet wide.

Put 36 balls into 4 piles of 9 balls. Place the piles between 5 and 30 yards from the hole.

Hit 9 balls from each pile. Aim every group of 9 at a different circle.

Try to land each ball into the correct circle. Move to the next pile and repeat until all 36 balls are hit.

Count the balls that stop inside the correct circle.

Add up your successful shots out of 36 attempts and enter the score in the app.

Set up 10 piles of balls in two lines. Each line has 5 piles. Lines are 8 yards apart. Piles in each line are 3 yards apart.

Place the piles on grass between 5 and 30 yards from the hole. Keep the same setup.

On the green, mark 9 stop zones using buckets, string, or tees. Zones cover different short chip targets.

Take 36 chip shots in total. Chip 4 balls to each of the 9 zones.

For each shot, chip from any pile. Try to stop the ball in the assigned zone. Chip 4 balls to one zone before moving to the next.

Count each ball that stops in the correct zone as a success.

After 36 shots, count how many were successful. Enter your score out of 36 in the app.

Make 9 stop zones on the green. Mark them with tees, string, or buckets. Line up or put them in a grid.

Put 36 balls in 4 rows. Each row has 9 balls, spaced 1 foot apart. Put the rows about 5 yards apart on the grass, between 5 and 20 yards from the green.

Plan to hit 4 balls at each of the 9 stop zones. That is 36 shots.

Start at any row of balls. Hit balls, trying to stop each one in the first stop zone.

After 4 tries at the first zone, go to the next zone and do the same. Keep going until you try all 9 zones.

Count a shot as a success if the ball stops completely inside the target zone.

When all shots are done, count the number of successful shots and enter the score in the app, out of 36 attempts.

Arrange 36 balls in 2 lines of 18 each to form an L shape.

Keep each ball 1 foot apart in each line. Keep 5-10 yards between the two lines.

Place two circles around the hole on the green: one with a 6-foot radius, and one with a 15-foot radius.

From 5–30 yards away, chip 18 balls from the first line, aiming for the circles.

Chip the other 18 balls from the second line, aiming for the circles.

Alternate hitting 3 to 5 shots between the two lines.

Shots inside the small circle = full success. Shots inside the big circle only = partial success.

Count how many balls stopped in each circle and get your score. Enter your total successful shots out of 36 attempts.

Set up 10 piles of balls in two lines of 5 piles, 6 yards/meters between lines, 4 yards/meters between piles.

Put the piles on grass, not on the green, between 5 and 30 yards/meters from the hole.

Mark 3 clear target zones around the hole, spaced evenly.

Hit 36 chip shots: 12 to Target Zone 1, 12 to Target Zone 2, and 12 to Target Zone

Always chip from the piles; for each set of 12 shots, pick any piles but only aim at the assigned zone.

After each shot, check if the ball stops inside the right target zone; count as success if it does.

Finish all 36 shots, then count total successes inside the right zones out of 36 attempts and enter this score in the app.

Put 40 balls into 8 lines. Each line has 5 balls. Lines should be about 1 yard or meter apart. Put these lines anywhere on the grass 5 to 30 yards/meters from the hole but not on the green.

On the green, use sticks, clubs, or string to mark 3 landing zones in a straight line about 6 feet (2 meters) apart.

Divide the 36 chip shots into 3 sets of 12 shots.

For each set, pick 3 lines of balls and aim every shot at one landing zone.

Hit 5 chips from each line to the chosen zone. After 3 lines (15 shots), change zones until all 36 shots are done.

Count each shot that lands and stays in the target zone as a success.

Enter the total number of successful shots in the app, out of 36 attempts.

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.