Chip Through Gate for Aim

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.

Set up 36 balls in 2 lines of 18 balls each, 5 to 10 yards apart, on grass 5 to 20 yards from the hole.

Mark 9 stop zones in a 3 x 3 grid on the green, spaced apart so the zones are clear.

Chip 4 balls to each stop zone, alternating between the two lines. For each zone, hit 2 balls from one line, then 2 from the other.

Keep doing this until you have hit 4 balls for each zone, for a total of 36 shots.

Count a shot as a success only if the ball stops in the right zone.

Add up the number of successes out of 36 attempts and enter the score in the app.

Pick a spot in the rough, on an uphill slope, 5–30 yards from the hole.

Put a target at the hole.

Hit 18 chip shots uphill, trying to stop the ball close to the hole.

Move to a downhill spot in the rough, also 5–30 yards from the hole.

Hit 18 chip shots downhill at the same target.

Every 4 shots, check the results and adjust if needed.

Count a success for every ball that finishes close to the hole (like within 3 feet).

Use the same setup for every shot.

After 36 shots, add up your total successes. Enter score in the app, out of 36 attempts.