Square up and send it: perfect alignment for Bump'n'Runs

Put 36 balls in 2 lines near the green. Each line has 18 balls about 1 foot apart.

Place the 2 lines so they cross each other like a plus sign, 5 to 10 yards apart.

Put 3 targets about 6 feet apart on the green.

Hit 12 shots at each target, for a total of 36 shots.

Start with one line and hit 12 shots trying to stop the ball within 10 feet of the first target.

Use the other line and hit 12 shots at the second target, same goal.

Hit 12 shots at the third target from either line, trying to keep within 10 feet.

Count each shot that stops within 10 feet of the target.

After 36 shots, write down your number of successful shots out of 36 attempts in the app.

Place 10 piles of balls in two lines that cross like a plus sign. Each line has 5 piles, 3 yards/meters apart.

The piles should be 1 to 10 yards/meters from the green and 5 to 30 yards/meters from the hole.

Mark 9 stop zones on the green in a 3x3 grid, spaced to cover different parts.

Hit 36 bump-and-run shots, divided into 9 groups of 4 shots.

For each group, pick a stop zone and hit 4 shots from any piles.

A shot is successful if it stops in the target stop zone.

Repeat until 4 shots have been aimed at each stop zone.

Count how many shots stopped inside their target zones. Enter your total out of 36 attempts.

Place 18 balls on the uphill slope and 18 balls on the downhill slope between 5 and 30 yards from the hole.

Set up 3 targets on the green, spaced evenly in a 10-foot wide area, labeled Target A, Target B, and Target C.

Hit 18 shots from the uphill slope and 18 shots from the downhill slope, for a total of 36 shots.

For each slope, hit 6 shots at Target A, then 6 shots at Target B, then 6 shots at Target C.

Keep the ball setup the same and do not move from your spot on the slope while hitting each group of shots.

Count each shot that lands and stops in the target zone as a success.

After all 36 shots, count and enter the number of successful shots in the app, out of 36 attempts.