Pinpoint Chips for Tap-Ins

Set up 10 piles of balls in two lines. Each line has 5 piles. Lines are 8 yards apart. Piles in each line are 3 yards apart.

Place the piles on grass between 5 and 30 yards from the hole. Keep the same setup.

On the green, mark 9 stop zones using buckets, string, or tees. Zones cover different short chip targets.

Take 36 chip shots in total. Chip 4 balls to each of the 9 zones.

For each shot, chip from any pile. Try to stop the ball in the assigned zone. Chip 4 balls to one zone before moving to the next.

Count each ball that stops in the correct zone as a success.

After 36 shots, count how many were successful. Enter your score out of 36 in the app.

Set up three landing zones on the green in a line, 6 feet apart.

Make three piles of 12 balls each at the edge of the green.

Use the first pile to chip balls into the first landing zone, 12 shots.

Use the second pile to chip balls into the second landing zone, 12 shots.

Use the third pile to chip balls into the third landing zone, 12 shots. Count how many balls land and stay in each zone.

After all 36 shots, enter the number of successes out of 36 in the app.

Set up 4 rows of balls. Each row has 9 balls, 1 foot apart.

Space the rows 5 yards apart on grass, between 5 and 30 yards from the hole.

Put 3 targets by the hole: A at 12 o'clock, B at 4 o'clock, C at 8 o'clock, each 3 feet from the hole.

Split the 36 shots into 3 groups of

First 12 shots go to Target A, next 12 to Target B, last 12 to Target C.

From each row, chip the ball to try to stop it close to the chosen target. Ball setup does not change.

After 12 shots at one target, switch to the next target. Repeat until all 36 shots are finished.

Each ball that stops within 2 feet of the target is a success.

Count how many successes you had and enter your score in the app out of 36 attempts.

Make 10 piles of 4 balls each from 40 balls. Arrange the piles in 2 lines with 5 piles in each line. Lines cross each other.

Put the piles on grass 5 to 30 yards/meters from the hole. Space lines 5 to 10 yards/meters apart and piles 2 yards/meters apart.

On the green, put 3 targets in a line, about 8 feet apart. Call them Target A, Target B, and Target C.

Hit 36 chip shots, 12 to each target.

Hit 12 shots at Target A, then 12 at Target B, then 12 at Target C. Use any pile for any shot.

Count a shot as a success if it stops within 10 feet of the target.

After all 36 shots, add how many were successful and enter the score in the app, out of 36 attempts.

Place 36 balls into 9 piles of 4 balls each. Arrange piles in two lines, with 4 in one line and 5 in the other, 5-10 yards apart and 2 yards between piles.

On the green, set up 3 landing zones side by side, 6 feet apart, using sticks, clubs, or string.

Hit 36 chip shots, 12 shots at each landing zone.

Hit 12 chip shots at the first landing zone from any piles.

Hit 12 chip shots at the second landing zone. Change piles if wanted.

Hit 12 chip shots at the third landing zone. Change piles if wanted.

Count a success each time the ball stays in the correct landing zone.

Add up all successful shots and enter score in the app out of 36 attempts.

Make 10 piles of balls, in 2 lines with 5 piles in each line. Space the lines 5 to 10 yards or meters apart, and piles in each line about 4 yards or meters apart.

Place piles between 5 and 30 yards or meters from the hole, but not on the green.

On the green, mark 9 stop zones using buckets, string, or tees. Put them in a clear 3 by 3 layout.

Hit 36 chip shots, in 9 groups of 4 shots each.

For each group of 4 shots, pick one stop zone to aim at and chip 4 balls towards it from any pile.

Repeat until 4 shots have been aimed at each of the 9 stop zones, making 36 shots in all.

Count only shots that stop inside their chosen stop zone.

Enter the number of successful shots out of 36 in the app.

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.

Arrange 36 balls in 2 lines of 18 each to form an L shape.

Keep each ball 1 foot apart in each line. Keep 5-10 yards between the two lines.

Place two circles around the hole on the green: one with a 6-foot radius, and one with a 15-foot radius.

From 5–30 yards away, chip 18 balls from the first line, aiming for the circles.

Chip the other 18 balls from the second line, aiming for the circles.

Alternate hitting 3 to 5 shots between the two lines.

Shots inside the small circle = full success. Shots inside the big circle only = partial success.

Count how many balls stopped in each circle and get your score. Enter your total successful shots out of 36 attempts.

Put 36 balls into 9 piles. Each pile has 4 balls. Put piles 5 to 30 yards from the hole.

Mark 9 target zones on the green.

Try to hit 4 balls into each zone. Do this for all 9 zones.

Always use the same ball setup. Only change which zone is the target.

Count each ball that stops inside the correct zone.

Add up all the successful shots out of

Enter score in the app, out of 36 attempts.