Thread Needle: Narrow Landing Zone

Set up 3 landing zones on the green, 6 feet apart in a straight line.

Place 3 piles of balls around the chipping area, each pile randomly 5 to 30 yards from the hole. Keep this setup the same.

Divide 36 chip shots into 3 groups of

For the first 12 shots, aim for the first landing zone from any pile.

For the next 12 shots, aim for the second landing zone from any pile.

For the last 12 shots, aim for the third landing zone from any pile.

Count each shot that lands and stays in the correct zone as a success.

Total the successful shots out of 36 and enter the score in the app.

Set up 10 piles of balls in two lines. Each line has 5 piles. Lines are 8 yards apart. Piles in each line are 3 yards apart.

Place the piles on grass between 5 and 30 yards from the hole. Keep the same setup.

On the green, mark 9 stop zones using buckets, string, or tees. Zones cover different short chip targets.

Take 36 chip shots in total. Chip 4 balls to each of the 9 zones.

For each shot, chip from any pile. Try to stop the ball in the assigned zone. Chip 4 balls to one zone before moving to the next.

Count each ball that stops in the correct zone as a success.

After 36 shots, count how many were successful. Enter your score out of 36 in the app.

Set up 4 lines of 9 balls each, 1 foot apart.

Put the lines on grass 5-20 yards/meters from the hole, not on the green.

On the green, make 4 quadrants using string or tees, each about 6 feet in radius.

Hit 36 chip shots in total, 9 to each quadrant.

Start at any ball line and chip 9 balls, aiming for Quadrant

Move to the next line and chip 9 balls to Quadrant

Do the same for Quadrants 3 and 4, 9 balls each.

Count each ball that stops in the target quadrant.

Add up the number of successful shots and enter the total out of 36 attempts.

Set up 10 piles of balls in two lines. Each line has 5 piles. The lines are 5 to 10 yards apart. Each pile in a line is 4 yards apart.

Put the piles 5 to 30 yards from the hole on any type of grass.

On the green, make 4 quadrants with string or tees. Each quadrant is about 6 feet wide.

Hit 36 chip shots. Hit 9 shots to each of the 4 quadrants.

Choose a pile and chip 9 balls, aiming for one quadrant.

After 9 shots, switch to the next quadrant. Do this for all 4 quadrants.

A chip that stops inside the right quadrant counts as a success.

After 36 shots, count how many balls stopped in the target quadrants and enter your score in the app out of 36 attempts.

Set up 4 rows of balls. Each row has 9 balls, 1 foot apart.

Space the rows 5 yards apart on grass, between 5 and 30 yards from the hole.

Put 3 targets by the hole: A at 12 o'clock, B at 4 o'clock, C at 8 o'clock, each 3 feet from the hole.

Split the 36 shots into 3 groups of

First 12 shots go to Target A, next 12 to Target B, last 12 to Target C.

From each row, chip the ball to try to stop it close to the chosen target. Ball setup does not change.

After 12 shots at one target, switch to the next target. Repeat until all 36 shots are finished.

Each ball that stops within 2 feet of the target is a success.

Count how many successes you had and enter your score in the app out of 36 attempts.

Put 40 balls into 8 lines. Each line has 5 balls. Lines should be about 1 yard or meter apart. Put these lines anywhere on the grass 5 to 30 yards/meters from the hole but not on the green.

On the green, use sticks, clubs, or string to mark 3 landing zones in a straight line about 6 feet (2 meters) apart.

Divide the 36 chip shots into 3 sets of 12 shots.

For each set, pick 3 lines of balls and aim every shot at one landing zone.

Hit 5 chips from each line to the chosen zone. After 3 lines (15 shots), change zones until all 36 shots are done.

Count each shot that lands and stays in the target zone as a success.

Enter the total number of successful shots in the app, out of 36 attempts.

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.

Put 36 balls into 6 piles of 6 balls on the grass, between 5 and 30 yards from the hole.

Place 3 flags or targets on the green, 6 feet apart in a line.

Split the 36 balls into 3 groups of 12 shots.

Hit the first 12 balls to the first flag and try to stop each ball within 10 feet of it.

Hit the next 12 balls to the second flag, trying to stop them within 10 feet.

Hit the last 12 balls to the third flag, again aiming to stop within 10 feet.

Switch which pile you use each time to practice different distances and grass.

Count every ball that stops within 10 feet of its flag as a successful shot.

Add up successful shots out of 36 and enter score in the app.

Set up 10 piles of 4 balls each in two rows. Each row has 5 piles.

Keep piles about 2 meters apart, rows 5–10 meters apart.

Place piles 5–30 meters from the hole, not on the green.

Mark two circles around the hole on the green: a small one (2 meters out) and a big one (5 meters out).

Take turns hitting balls from different piles, trying to stop balls in the circles.

Hit 36 balls total: 18 try for the small circle, 18 for the big circle.

Count how many balls finished in each circle.

Add these for a score and enter your total out of 36 tries.