Thread the needle: roll your Bump'n'Run to tap-in range

Put 36 balls into 6 piles of 6 balls each around the chipping area, between 1 and 10 yards from the green, and 5 to 30 yards from the hole.

On the green, make two rings around the hole with string or tees: a small ring with a 6-foot radius and a bigger ring with a 15-foot radius.

Split your shots into two groups of

For the first 18 shots, try to land the ball inside the small ring (6-foot radius).

For the next 18 shots, try to land the ball inside the big ring but outside the small ring.

Hit one ball at a time from any pile. Do 18 shots for the first target, then do 18 shots for the second target.

Count every ball that stops inside the target ring as a success.

After all 36 shots, add up how many landed in the right rings and enter your score in the app, out of 36 attempts.

Put 40 balls in 8 lines of 5 balls each around the green. Lines should be about 1 yard/meter apart and placed 1 to 10 yards/meters from the green and 5 to 30 yards/meters from the hole.

On the green, mark two circle zones around the hole: one with a 6-foot (2 meter) radius and another with a 15-foot (5 meter) radius.

Hit 36 bump-and-run shots—first 18 shots aiming for the small inner circle, then 18 shots aiming for the bigger outer circle.

Use any line of balls. Hit shots for the inner circle for 18 attempts, then switch to hitting shots for the outer circle for another 18 attempts. Change lines as wanted.

Count each ball that stops in the circle aimed for as a success.

After all 36 shots, add the number of successful shots out of 36 and enter your score in the app.

Make two piles of 18 golf balls near the green: one pile has balls above foot level, one pile has balls below foot level.

Mark three landing zones in a line on the green's edge, about 5 feet apart (Zone A, Zone B, Zone C).

Hit 18 shots from the above-feet pile and 18 shots from the below-feet pile, for a total of 36 shots.

For each pile, hit 6 balls to Zone A, 6 balls to Zone B, and 6 balls to Zone C.

Count how many balls landed in the correct zone.

Add your successful shots and enter your total score in the app, out of 36 attempts.

Set up two lines of 18 golf balls each on a sloped fairway near the green: one line on the uphill slope, one line on the downhill slope. Balls should be spaced 5 yards apart, between 5 and 30 yards from the hole.

Place 3 target zones on the green in a row, 6 feet apart. Call them Zone 1 (closest), Zone 2 (middle), and Zone 3 (farthest).

Hit 36 total bump-and-run shots: 18 from the uphill line, 18 from the downhill line.

From the uphill line, hit 6 shots to each zone (6 to Zone 1, 6 to Zone 2, 6 to Zone 3). Always hit every third ball, skipping two balls between shots.

For the downhill line, repeat the process: 6 shots to each zone, using every third ball.

Count a success each time a ball stops inside the intended target zone.

When all 36 shots are done, record how many balls landed in the correct zone, out of 36 attempts, in the app.

Make two piles of 18 golf balls each (36 balls total). Keep the balls in the same spot for every shot.

Put three markers on the green to make three target zones. Space them about 5 feet apart, in a straight line.

Hit 36 shots in total—12 shots to each target zone.

First, hit 12 shots at Zone 1, then 12 at Zone 2, then 12 at Zone

Switch between piles (above feet and below feet shots) for each group if possible, or finish one slope for all zones, then switch to the other.

Count every shot that stops inside the correct zone as a success.

After all shots, enter total successful shots in the app, out of 36 attempts.