Pinpoint Chips for Tap-Ins

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.

Set up 3 landing zones on the green, 6 feet apart in a straight line.

Place 3 piles of balls around the chipping area, each pile randomly 5 to 30 yards from the hole. Keep this setup the same.

Divide 36 chip shots into 3 groups of

For the first 12 shots, aim for the first landing zone from any pile.

For the next 12 shots, aim for the second landing zone from any pile.

For the last 12 shots, aim for the third landing zone from any pile.

Count each shot that lands and stays in the correct zone as a success.

Total the successful shots out of 36 and enter the score in the app.

Arrange 36 balls in 2 lines of 18 each to form an L shape.

Keep each ball 1 foot apart in each line. Keep 5-10 yards between the two lines.

Place two circles around the hole on the green: one with a 6-foot radius, and one with a 15-foot radius.

From 5–30 yards away, chip 18 balls from the first line, aiming for the circles.

Chip the other 18 balls from the second line, aiming for the circles.

Alternate hitting 3 to 5 shots between the two lines.

Shots inside the small circle = full success. Shots inside the big circle only = partial success.

Count how many balls stopped in each circle and get your score. Enter your total successful shots out of 36 attempts.

Set up 10 piles of 4 balls each in two rows. Each row has 5 piles.

Keep piles about 2 meters apart, rows 5–10 meters apart.

Place piles 5–30 meters from the hole, not on the green.

Mark two circles around the hole on the green: a small one (2 meters out) and a big one (5 meters out).

Take turns hitting balls from different piles, trying to stop balls in the circles.

Hit 36 balls total: 18 try for the small circle, 18 for the big circle.

Count how many balls finished in each circle.

Add these for a score and enter your total out of 36 tries.

Put 40 balls into 8 lines. Each line has 5 balls. Lines should be about 1 yard or meter apart. Put these lines anywhere on the grass 5 to 30 yards/meters from the hole but not on the green.

On the green, use sticks, clubs, or string to mark 3 landing zones in a straight line about 6 feet (2 meters) apart.

Divide the 36 chip shots into 3 sets of 12 shots.

For each set, pick 3 lines of balls and aim every shot at one landing zone.

Hit 5 chips from each line to the chosen zone. After 3 lines (15 shots), change zones until all 36 shots are done.

Count each shot that lands and stays in the target zone as a success.

Enter the total number of successful shots in the app, out of 36 attempts.

Put 10 piles of balls in two straight lines that cross. Each pile has 3 or 4 balls. Keep each pile between 5 and 30 yards from the hole.

Mark 3 landing zones on the green in a row. Make them 6 feet apart using sticks or string.

Hit 36 chip shots total. Aim for each landing zone 12 times.

Pick any pile to start. Hit 12 chips to the first zone, then 12 to the second zone, then 12 to the third zone.

Count how many balls land and stop inside the target zone for each shot.

Add up the number of successful shots and enter your score in the app, out of 36 attempts.

Mark 4 areas on the green with string or tees. Each area should be a circle about 6 feet wide.

Put 36 balls into 4 piles of 9 balls. Place the piles between 5 and 30 yards from the hole.

Hit 9 balls from each pile. Aim every group of 9 at a different circle.

Try to land each ball into the correct circle. Move to the next pile and repeat until all 36 balls are hit.

Count the balls that stop inside the correct circle.

Add up your successful shots out of 36 attempts and enter the score in the app.

Set up 10 piles of 4 balls each in two rows (5 piles per row), spaced 2 yards/meters apart. Put the rows 5 to 10 yards/meters apart and place the piles 5 to 30 yards/meters from the hole.

Mark 9 stop zones on the green using buckets, string, or tees. Space them out so each zone is different.

Prepare to hit 36 chip shots, divided into 9 groups of 4 shots. Each group targets a different stop zone.

From any pile, hit 4 shots at the first stop zone. Move to the next stop zone and hit 4 shots at it. Keep going until you’ve aimed 4 shots at each of the 9 zones.

Count every ball that stops inside the right zone as a success.

When done, count up all successful stops out of 36 attempts and enter the score in the app.

Make 10 piles of balls, in 2 lines with 5 piles in each line. Space the lines 5 to 10 yards or meters apart, and piles in each line about 4 yards or meters apart.

Place piles between 5 and 30 yards or meters from the hole, but not on the green.

On the green, mark 9 stop zones using buckets, string, or tees. Put them in a clear 3 by 3 layout.

Hit 36 chip shots, in 9 groups of 4 shots each.

For each group of 4 shots, pick one stop zone to aim at and chip 4 balls towards it from any pile.

Repeat until 4 shots have been aimed at each of the 9 stop zones, making 36 shots in all.

Count only shots that stop inside their chosen stop zone.

Enter the number of successful shots out of 36 in the app.