Save par with a clutch mixed shot—pressure drill

Set up 9 short holes around the practice area. Put one ball per player on different lies like sand, rough, and slopes.

Each hole is a PAR 2 challenge.

Play the 9 holes two times. Take 2 shots per hole each time. This means 36 shots total.

At each hole, hit your wedge or short shot to the green, then putt until you finish the hole.

Go to the next hole when you finish. Do this for all 9 holes, two times.

Count each hole finished in 2 shots or fewer as a success.

Add the number of successful holes. Enter your score in the app out of 36 attempts.

Place 9 balls in different spots around the chipping green, like sand, sloped rough, and deep rough, 20 to 40 yards from the green.

Treat each ball as its own hole with a Par 2 score. The aim is to get the ball on the green and into the hole in as few strokes as possible.

For each ball, hit one shot to the green, then putt until the ball is holed. Count how many strokes you used.

Do this for all 9 balls to finish 9 holes.

Repeat the course 2 more times, moving the balls a little each time, to finish 36 holes.

Add up all your strokes for 36 holes. Par is 72 strokes.

Enter your total score in the app out of 36 holes.

Set up 9 holes in the chipping area, using different lies, 20-40 yards from the green.

Put 4 balls at each hole, for 36 shots total.

For each shot, hit to the green and finish the hole with putting.

Do this for each hole 4 times.

Count strokes for each hole. Mark if hole is completed in 2 shots or less.

Add up how many times par was made in 36 shots.

Enter the total successful shots out of 36 attempts as your test score.

Set up 9 holes in different places around the chipping area, like sand, sloped ground, rough, or deep rough.

Put 4 balls at each hole, one for each player.

Each ball spot is a PAR 2 hole. Chip or pitch the ball onto the green, then putt until the ball goes in.

Play all 9 holes, hitting one shot to the green and putting until you finish the hole.

Repeat the 9-hole course 4 times for a total of 36 shots.

Count how many shots were used for each hole, compare to PAR 2, and keep score (lower score is better).

When finished, enter how many times you completed holes at or below the expected score out of 36 attempts in the app.

Make 9 holes around the chipping area using things like sand, sloped rough, and deep rough to make each hole different.

Put one ball for each player at every hole spot. If there are 5 players, put 5 balls at every hole.

Each ball spot is its own 'PAR 2' hole to finish.

At each hole, players chip or wedge from 20-40 yards onto the green, then putt to finish.

Finish the hole (chip and putts) before going to the next one.

Do this for all 9 holes to make one round of 18 tries (about 2 shots per hole).

To get 36 tries, play two rounds of the 9 holes, using new ball spots each time.

Count how many holes were finished in 2 shots or less.

Enter the total number of successful holes out of 36 tries as your score.

Place 9 balls in hard spots around the green like bunkers, rough, or tight lies.

Each ball is like a hole on a 9-hole course. Par for each hole is 2 shots.

For each ball, hit onto the green with a wedge or chip.

Once on the green, putt until finished.

Count shots for each hole and track your total score for all 9 holes.

Do the 9-hole course 4 times, moving balls to new tough spots each round.

You will hit 36 shots (4 rounds × 9 holes). At the end, add up how many holes you finished in 2 or fewer shots (par or better). Enter your score out of 36 tries in the app.

Put 9 balls in different spots around the chipping green in areas like sand, sloped rough, or deep rough.

Each ball is its own hole with par 2, so total par is 18 for all 9 balls.

Hit one wedge or chip shot to get each ball onto the green.

Use a putter to finish each hole by putting the ball in the hole.

Go through all 9 holes once.

Do the 9 holes again, then another time, to reach 27 holes.

Play 9 more holes so you have played 36 holes total (4 rounds of 9).

Count your total shots for all 36 holes and compare that to par

At the end, enter the number of holes finished at or under par in the app, out of 36 tries.

Make 9 hard spots around the chipping area, like sand, slopes, or thick grass.

Put 4 balls at each spot for a total of 36 shots.

Treat each ball as its own hole with par 2 scoring.

Hit the ball onto the green with a wedge, then finish with a putter.

Finish all 4 balls at one spot before going to the next.

Do all 9 holes a second time to try for a lower score.

Count strokes for each ball and keep a total score out of

Passing means making par (2 or better) on enough holes for your handicap group.

At the end, count number of pars or better out of 36 tries and enter score in the app.

Place 9 balls in different spots around the chipping green like light rough, sand, or short grass 20 to 40 yards from the hole.

Treat each ball as a PAR 2 hole. Hit one wedge shot to the green, then try to putt the ball into the hole.

Finish each ball before starting the next one.

Repeat this process 4 times for a total of 36 shots.

Count how many strokes it takes for each hole.

Count how many holes you finish in 2 strokes or fewer. After finishing, enter your total successful holes out of 36.