Pinpoint Chips for Tap-Ins

Set up 36 balls in 2 lines of 18 balls each, 5 to 10 yards apart, on grass 5 to 20 yards from the hole.

Mark 9 stop zones in a 3 x 3 grid on the green, spaced apart so the zones are clear.

Chip 4 balls to each stop zone, alternating between the two lines. For each zone, hit 2 balls from one line, then 2 from the other.

Keep doing this until you have hit 4 balls for each zone, for a total of 36 shots.

Count a shot as a success only if the ball stops in the right zone.

Add up the number of successes out of 36 attempts and enter the score in the app.

Make 9 stop zones on the green. Mark them with tees, string, or buckets. Line up or put them in a grid.

Put 36 balls in 4 rows. Each row has 9 balls, spaced 1 foot apart. Put the rows about 5 yards apart on the grass, between 5 and 20 yards from the green.

Plan to hit 4 balls at each of the 9 stop zones. That is 36 shots.

Start at any row of balls. Hit balls, trying to stop each one in the first stop zone.

After 4 tries at the first zone, go to the next zone and do the same. Keep going until you try all 9 zones.

Count a shot as a success if the ball stops completely inside the target zone.

When all shots are done, count the number of successful shots and enter the score in the app, out of 36 attempts.

Put 36 balls into 6 piles of 6 balls on the grass, between 5 and 30 yards from the hole.

Place 3 flags or targets on the green, 6 feet apart in a line.

Split the 36 balls into 3 groups of 12 shots.

Hit the first 12 balls to the first flag and try to stop each ball within 10 feet of it.

Hit the next 12 balls to the second flag, trying to stop them within 10 feet.

Hit the last 12 balls to the third flag, again aiming to stop within 10 feet.

Switch which pile you use each time to practice different distances and grass.

Count every ball that stops within 10 feet of its flag as a successful shot.

Add up successful shots out of 36 and enter score in the app.

Make 10 piles of balls, in 2 lines with 5 piles in each line. Space the lines 5 to 10 yards or meters apart, and piles in each line about 4 yards or meters apart.

Place piles between 5 and 30 yards or meters from the hole, but not on the green.

On the green, mark 9 stop zones using buckets, string, or tees. Put them in a clear 3 by 3 layout.

Hit 36 chip shots, in 9 groups of 4 shots each.

For each group of 4 shots, pick one stop zone to aim at and chip 4 balls towards it from any pile.

Repeat until 4 shots have been aimed at each of the 9 stop zones, making 36 shots in all.

Count only shots that stop inside their chosen stop zone.

Enter the number of successful shots out of 36 in the app.

Arrange 10 piles of balls in two lines that cross each other. Each line has 5 piles. Each pile has the same number of balls.

Put the piles 5 to 30 yards from the hole. Leave 3 yards between piles in a line. Make lines 5 to 10 yards apart.

Set up 3 targets around the green. Each target is about 6 feet apart from the others.

There are 36 chip shots total, with 12 shots for each target.

Always use the same stance and ball position for every shot.

For each set of 12 shots, chip to the target from any pile. Try to get close to the target.

A shot is a success if the ball stops within 3 feet of the target.

After all 36 shots, add up how many balls stopped within 3 feet of the target and enter the score out of 36 attempts in the app.

Mark 4 areas on the green with string or tees. Each area should be a circle about 6 feet wide.

Put 36 balls into 4 piles of 9 balls. Place the piles between 5 and 30 yards from the hole.

Hit 9 balls from each pile. Aim every group of 9 at a different circle.

Try to land each ball into the correct circle. Move to the next pile and repeat until all 36 balls are hit.

Count the balls that stop inside the correct circle.

Add up your successful shots out of 36 attempts and enter the score in the app.