Pinpoint Chips for Tap-Ins

Place 36 balls in two lines that cross, with 18 balls in each line.

Keep the balls about 1 foot apart, with lines set up 5 to 30 yards from the hole.

On the green, divide a 6-foot circle around the hole into 4 equal parts.

Split the 36 chip shots into 4 groups of 9 balls.

Aim the first 9 shots at the first part of the circle.

Switch to the other line and aim the next 9 balls at the second part. Keep switching lines and aim at the next parts until all 36 balls are chipped.

Count how many balls land in the right part each time.

Enter the number of successful chips out of 36 attempts in the app.

Arrange 10 piles of balls in two lines that cross each other. Each line has 5 piles. Each pile has the same number of balls.

Put the piles 5 to 30 yards from the hole. Leave 3 yards between piles in a line. Make lines 5 to 10 yards apart.

Set up 3 targets around the green. Each target is about 6 feet apart from the others.

There are 36 chip shots total, with 12 shots for each target.

Always use the same stance and ball position for every shot.

For each set of 12 shots, chip to the target from any pile. Try to get close to the target.

A shot is a success if the ball stops within 3 feet of the target.

After all 36 shots, add up how many balls stopped within 3 feet of the target and enter the score out of 36 attempts in the app.

Put 40 balls into 8 lines. Each line has 5 balls. Lines should be about 1 yard or meter apart. Put these lines anywhere on the grass 5 to 30 yards/meters from the hole but not on the green.

On the green, use sticks, clubs, or string to mark 3 landing zones in a straight line about 6 feet (2 meters) apart.

Divide the 36 chip shots into 3 sets of 12 shots.

For each set, pick 3 lines of balls and aim every shot at one landing zone.

Hit 5 chips from each line to the chosen zone. After 3 lines (15 shots), change zones until all 36 shots are done.

Count each shot that lands and stays in the target zone as a success.

Enter the total number of successful shots in the app, out of 36 attempts.

Set up 10 piles of balls in two lines. Each line has 5 piles. The lines are 5 to 10 yards apart. Each pile in a line is 4 yards apart.

Put the piles 5 to 30 yards from the hole on any type of grass.

On the green, make 4 quadrants with string or tees. Each quadrant is about 6 feet wide.

Hit 36 chip shots. Hit 9 shots to each of the 4 quadrants.

Choose a pile and chip 9 balls, aiming for one quadrant.

After 9 shots, switch to the next quadrant. Do this for all 4 quadrants.

A chip that stops inside the right quadrant counts as a success.

After 36 shots, count how many balls stopped in the target quadrants and enter your score in the app out of 36 attempts.

Set up 10 piles of balls in two lines. Each line has 5 piles. Lines are 8 yards apart. Piles in each line are 3 yards apart.

Place the piles on grass between 5 and 30 yards from the hole. Keep the same setup.

On the green, mark 9 stop zones using buckets, string, or tees. Zones cover different short chip targets.

Take 36 chip shots in total. Chip 4 balls to each of the 9 zones.

For each shot, chip from any pile. Try to stop the ball in the assigned zone. Chip 4 balls to one zone before moving to the next.

Count each ball that stops in the correct zone as a success.

After 36 shots, count how many were successful. Enter your score out of 36 in the app.

Put 10 piles of balls in two straight lines that cross. Each pile has 3 or 4 balls. Keep each pile between 5 and 30 yards from the hole.

Mark 3 landing zones on the green in a row. Make them 6 feet apart using sticks or string.

Hit 36 chip shots total. Aim for each landing zone 12 times.

Pick any pile to start. Hit 12 chips to the first zone, then 12 to the second zone, then 12 to the third zone.

Count how many balls land and stop inside the target zone for each shot.

Add up the number of successful shots and enter your score in the app, out of 36 attempts.