Pinpoint Chips for Tap-Ins

Set up 36 balls in 2 lines of 18 balls each, 5 to 10 yards apart, on grass 5 to 20 yards from the hole.

Mark 9 stop zones in a 3 x 3 grid on the green, spaced apart so the zones are clear.

Chip 4 balls to each stop zone, alternating between the two lines. For each zone, hit 2 balls from one line, then 2 from the other.

Keep doing this until you have hit 4 balls for each zone, for a total of 36 shots.

Count a shot as a success only if the ball stops in the right zone.

Add up the number of successes out of 36 attempts and enter the score in the app.

Set up 10 piles of 4 balls each in two rows (5 piles per row), spaced 2 yards/meters apart. Put the rows 5 to 10 yards/meters apart and place the piles 5 to 30 yards/meters from the hole.

Mark 9 stop zones on the green using buckets, string, or tees. Space them out so each zone is different.

Prepare to hit 36 chip shots, divided into 9 groups of 4 shots. Each group targets a different stop zone.

From any pile, hit 4 shots at the first stop zone. Move to the next stop zone and hit 4 shots at it. Keep going until you’ve aimed 4 shots at each of the 9 zones.

Count every ball that stops inside the right zone as a success.

When done, count up all successful stops out of 36 attempts and enter the score in the app.

Put 36 balls into 9 piles. Each pile has 4 balls. Put piles 5 to 30 yards from the hole.

Mark 9 target zones on the green.

Try to hit 4 balls into each zone. Do this for all 9 zones.

Always use the same ball setup. Only change which zone is the target.

Count each ball that stops inside the correct zone.

Add up all the successful shots out of

Enter score in the app, out of 36 attempts.

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.

Put 40 balls into 8 lines. Each line has 5 balls. Lines should be about 1 yard or meter apart. Put these lines anywhere on the grass 5 to 30 yards/meters from the hole but not on the green.

On the green, use sticks, clubs, or string to mark 3 landing zones in a straight line about 6 feet (2 meters) apart.

Divide the 36 chip shots into 3 sets of 12 shots.

For each set, pick 3 lines of balls and aim every shot at one landing zone.

Hit 5 chips from each line to the chosen zone. After 3 lines (15 shots), change zones until all 36 shots are done.

Count each shot that lands and stays in the target zone as a success.

Enter the total number of successful shots in the app, out of 36 attempts.

Put 36 balls into 6 piles of 6 balls on the grass, between 5 and 30 yards from the hole.

Place 3 flags or targets on the green, 6 feet apart in a line.

Split the 36 balls into 3 groups of 12 shots.

Hit the first 12 balls to the first flag and try to stop each ball within 10 feet of it.

Hit the next 12 balls to the second flag, trying to stop them within 10 feet.

Hit the last 12 balls to the third flag, again aiming to stop within 10 feet.

Switch which pile you use each time to practice different distances and grass.

Count every ball that stops within 10 feet of its flag as a successful shot.

Add up successful shots out of 36 and enter score in the app.