Pinpoint Chips for Tap-Ins

Arrange 10 piles of balls in two lines that cross each other. Each line has 5 piles. Each pile has the same number of balls.

Put the piles 5 to 30 yards from the hole. Leave 3 yards between piles in a line. Make lines 5 to 10 yards apart.

Set up 3 targets around the green. Each target is about 6 feet apart from the others.

There are 36 chip shots total, with 12 shots for each target.

Always use the same stance and ball position for every shot.

For each set of 12 shots, chip to the target from any pile. Try to get close to the target.

A shot is a success if the ball stops within 3 feet of the target.

After all 36 shots, add up how many balls stopped within 3 feet of the target and enter the score out of 36 attempts in the app.

Set up 4 lines of 9 balls each, 1 foot apart.

Put the lines on grass 5-20 yards/meters from the hole, not on the green.

On the green, make 4 quadrants using string or tees, each about 6 feet in radius.

Hit 36 chip shots in total, 9 to each quadrant.

Start at any ball line and chip 9 balls, aiming for Quadrant

Move to the next line and chip 9 balls to Quadrant

Do the same for Quadrants 3 and 4, 9 balls each.

Count each ball that stops in the target quadrant.

Add up the number of successful shots and enter the total out of 36 attempts.

Make 10 piles of balls, in 2 lines with 5 piles in each line. Space the lines 5 to 10 yards or meters apart, and piles in each line about 4 yards or meters apart.

Place piles between 5 and 30 yards or meters from the hole, but not on the green.

On the green, mark 9 stop zones using buckets, string, or tees. Put them in a clear 3 by 3 layout.

Hit 36 chip shots, in 9 groups of 4 shots each.

For each group of 4 shots, pick one stop zone to aim at and chip 4 balls towards it from any pile.

Repeat until 4 shots have been aimed at each of the 9 stop zones, making 36 shots in all.

Count only shots that stop inside their chosen stop zone.

Enter the number of successful shots out of 36 in the app.

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.

Set up 10 piles of balls in two lines. Each line has 5 piles. The lines are 5 to 10 yards apart. Each pile in a line is 4 yards apart.

Put the piles 5 to 30 yards from the hole on any type of grass.

On the green, make 4 quadrants with string or tees. Each quadrant is about 6 feet wide.

Hit 36 chip shots. Hit 9 shots to each of the 4 quadrants.

Choose a pile and chip 9 balls, aiming for one quadrant.

After 9 shots, switch to the next quadrant. Do this for all 4 quadrants.

A chip that stops inside the right quadrant counts as a success.

After 36 shots, count how many balls stopped in the target quadrants and enter your score in the app out of 36 attempts.

Put 36 balls into 6 piles of 6 balls on the grass, between 5 and 30 yards from the hole.

Place 3 flags or targets on the green, 6 feet apart in a line.

Split the 36 balls into 3 groups of 12 shots.

Hit the first 12 balls to the first flag and try to stop each ball within 10 feet of it.

Hit the next 12 balls to the second flag, trying to stop them within 10 feet.

Hit the last 12 balls to the third flag, again aiming to stop within 10 feet.

Switch which pile you use each time to practice different distances and grass.

Count every ball that stops within 10 feet of its flag as a successful shot.

Add up successful shots out of 36 and enter score in the app.

Set up 36 balls in 2 lines of 18 balls each, 5 to 10 yards apart, on grass 5 to 20 yards from the hole.

Mark 9 stop zones in a 3 x 3 grid on the green, spaced apart so the zones are clear.

Chip 4 balls to each stop zone, alternating between the two lines. For each zone, hit 2 balls from one line, then 2 from the other.

Keep doing this until you have hit 4 balls for each zone, for a total of 36 shots.

Count a shot as a success only if the ball stops in the right zone.

Add up the number of successes out of 36 attempts and enter the score in the app.

Place 36 balls in two lines that cross, with 18 balls in each line.

Keep the balls about 1 foot apart, with lines set up 5 to 30 yards from the hole.

On the green, divide a 6-foot circle around the hole into 4 equal parts.

Split the 36 chip shots into 4 groups of 9 balls.

Aim the first 9 shots at the first part of the circle.

Switch to the other line and aim the next 9 balls at the second part. Keep switching lines and aim at the next parts until all 36 balls are chipped.

Count how many balls land in the right part each time.

Enter the number of successful chips out of 36 attempts in the app.

Make two crossing lines with 18 balls in each line.

Put the balls 1 foot (30 cm) apart on grass, 5 to 20 yards/meters from the hole.

Place 2 flags on the green. The flags should be 5 to 10 yards/meters apart.

Hit 18 balls from the first line. Try to land each ball within 10 feet (3 meters) of the first flag.

Move to the second line. Hit 18 balls trying to land each within 10 feet (3 meters) of the second flag.

Count how many balls stop inside the 10-foot (3-meter) circle near each flag. Enter the score in the app out of 36 attempts.