Pinpoint Chips for Tap-Ins

Put 36 balls into 6 piles of 6 balls on the grass, between 5 and 30 yards from the hole.

Place 3 flags or targets on the green, 6 feet apart in a line.

Split the 36 balls into 3 groups of 12 shots.

Hit the first 12 balls to the first flag and try to stop each ball within 10 feet of it.

Hit the next 12 balls to the second flag, trying to stop them within 10 feet.

Hit the last 12 balls to the third flag, again aiming to stop within 10 feet.

Switch which pile you use each time to practice different distances and grass.

Count every ball that stops within 10 feet of its flag as a successful shot.

Add up successful shots out of 36 and enter score in the app.

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.

Set up 36 balls in 2 lines of 18 balls each, 5 to 10 yards apart, on grass 5 to 20 yards from the hole.

Mark 9 stop zones in a 3 x 3 grid on the green, spaced apart so the zones are clear.

Chip 4 balls to each stop zone, alternating between the two lines. For each zone, hit 2 balls from one line, then 2 from the other.

Keep doing this until you have hit 4 balls for each zone, for a total of 36 shots.

Count a shot as a success only if the ball stops in the right zone.

Add up the number of successes out of 36 attempts and enter the score in the app.

Put 40 balls into 8 lines. Each line has 5 balls. Lines should be about 1 yard or meter apart. Put these lines anywhere on the grass 5 to 30 yards/meters from the hole but not on the green.

On the green, use sticks, clubs, or string to mark 3 landing zones in a straight line about 6 feet (2 meters) apart.

Divide the 36 chip shots into 3 sets of 12 shots.

For each set, pick 3 lines of balls and aim every shot at one landing zone.

Hit 5 chips from each line to the chosen zone. After 3 lines (15 shots), change zones until all 36 shots are done.

Count each shot that lands and stays in the target zone as a success.

Enter the total number of successful shots in the app, out of 36 attempts.

Make 9 stop zones on the green. Mark them with tees, string, or buckets. Line up or put them in a grid.

Put 36 balls in 4 rows. Each row has 9 balls, spaced 1 foot apart. Put the rows about 5 yards apart on the grass, between 5 and 20 yards from the green.

Plan to hit 4 balls at each of the 9 stop zones. That is 36 shots.

Start at any row of balls. Hit balls, trying to stop each one in the first stop zone.

After 4 tries at the first zone, go to the next zone and do the same. Keep going until you try all 9 zones.

Count a shot as a success if the ball stops completely inside the target zone.

When all shots are done, count the number of successful shots and enter the score in the app, out of 36 attempts.

Arrange 36 balls in 2 lines of 18 each to form an L shape.

Keep each ball 1 foot apart in each line. Keep 5-10 yards between the two lines.

Place two circles around the hole on the green: one with a 6-foot radius, and one with a 15-foot radius.

From 5–30 yards away, chip 18 balls from the first line, aiming for the circles.

Chip the other 18 balls from the second line, aiming for the circles.

Alternate hitting 3 to 5 shots between the two lines.

Shots inside the small circle = full success. Shots inside the big circle only = partial success.

Count how many balls stopped in each circle and get your score. Enter your total successful shots out of 36 attempts.