Pick Line and Commit

Set up 10 piles of 4 balls each in two rows. Each row has 5 piles.

Keep piles about 2 meters apart, rows 5–10 meters apart.

Place piles 5–30 meters from the hole, not on the green.

Mark two circles around the hole on the green: a small one (2 meters out) and a big one (5 meters out).

Take turns hitting balls from different piles, trying to stop balls in the circles.

Hit 36 balls total: 18 try for the small circle, 18 for the big circle.

Count how many balls finished in each circle.

Add these for a score and enter your total out of 36 tries.

Make two groups of 18 balls; one for balls above feet, one for balls below feet.

Put 3 targets in a straight line on the green, about 6 feet apart.

Hit 36 chip shots total: 18 with balls above feet, 18 with balls below feet.

Split each set of 18 shots into three groups of

Each group of 6 goes to a different target.

With balls above feet, hit 6 shots to each target, keeping ball position the same.

With balls below feet, do the same: 6 shots to each target.

Count any shot that stops within 3 feet of the target as a success.

Count how many successful shots you had. Enter your score out of 36.

Gather 36 balls and split into 2 groups of 18 balls.

Pick one target (pin) on the green.

For the first 18 shots, place the ball above your feet in the rough 5–20 yards from the hole.

Chip all 18 balls, trying to get close to the target.

Move to the other slope so the ball is below your feet, same distance.

Chip the last 18 balls at the target.

Count each shot that stops within 3 feet of the hole as a success.

Enter the number of successes out of 36 in the app.

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.

Arrange 36 balls in 2 lines of 18 balls each. Keep the lines 5 to 10 yards apart. Place balls 1 foot apart.

Mark a 6-foot circle around the hole. Divide the circle into 4 sections using markers.

Split the 36 chips into 4 sets of 9 shots.

From the first line, hit 9 chips at Quadrant

From the second line, hit 9 chips at Quadrant

From the first line, hit 9 chips at Quadrant

From the second line, hit 9 chips at Quadrant

Count each ball that stops in the correct quadrant.

Add up all successful shots and enter your score, out of 36, in the app.

Set up 10 piles of balls in two lines of 5 piles, 6 yards/meters between lines, 4 yards/meters between piles.

Put the piles on grass, not on the green, between 5 and 30 yards/meters from the hole.

Mark 3 clear target zones around the hole, spaced evenly.

Hit 36 chip shots: 12 to Target Zone 1, 12 to Target Zone 2, and 12 to Target Zone

Always chip from the piles; for each set of 12 shots, pick any piles but only aim at the assigned zone.

After each shot, check if the ball stops inside the right target zone; count as success if it does.

Finish all 36 shots, then count total successes inside the right zones out of 36 attempts and enter this score in the app.

Divide 36 balls into 3 groups of 12 balls each.

Put 3 targets on the green, each about 3 feet apart.

From about 10-20 yards away, chip 12 balls and try to get them to stop inside Target

Chip 12 balls at Target 2, same way.

Chip 12 balls at Target 3, same way.

Count how many shots stop inside the right target.

Add up your total successful shots out of 36 and enter score in the app.