Pinpoint Chips for Tap-Ins

Place 36 balls in two lines that cross, with 18 balls in each line.

Keep the balls about 1 foot apart, with lines set up 5 to 30 yards from the hole.

On the green, divide a 6-foot circle around the hole into 4 equal parts.

Split the 36 chip shots into 4 groups of 9 balls.

Aim the first 9 shots at the first part of the circle.

Switch to the other line and aim the next 9 balls at the second part. Keep switching lines and aim at the next parts until all 36 balls are chipped.

Count how many balls land in the right part each time.

Enter the number of successful chips out of 36 attempts in the app.

Set up 4 lines of 9 balls each, 1 foot apart.

Put the lines on grass 5-20 yards/meters from the hole, not on the green.

On the green, make 4 quadrants using string or tees, each about 6 feet in radius.

Hit 36 chip shots in total, 9 to each quadrant.

Start at any ball line and chip 9 balls, aiming for Quadrant

Move to the next line and chip 9 balls to Quadrant

Do the same for Quadrants 3 and 4, 9 balls each.

Count each ball that stops in the target quadrant.

Add up the number of successful shots and enter the total out of 36 attempts.

Mark 4 areas on the green with string or tees. Each area should be a circle about 6 feet wide.

Put 36 balls into 4 piles of 9 balls. Place the piles between 5 and 30 yards from the hole.

Hit 9 balls from each pile. Aim every group of 9 at a different circle.

Try to land each ball into the correct circle. Move to the next pile and repeat until all 36 balls are hit.

Count the balls that stop inside the correct circle.

Add up your successful shots out of 36 attempts and enter the score in the app.

Set up 10 piles of balls in two lines. Each line has 5 piles. Lines are 8 yards apart. Piles in each line are 3 yards apart.

Place the piles on grass between 5 and 30 yards from the hole. Keep the same setup.

On the green, mark 9 stop zones using buckets, string, or tees. Zones cover different short chip targets.

Take 36 chip shots in total. Chip 4 balls to each of the 9 zones.

For each shot, chip from any pile. Try to stop the ball in the assigned zone. Chip 4 balls to one zone before moving to the next.

Count each ball that stops in the correct zone as a success.

After 36 shots, count how many were successful. Enter your score out of 36 in the app.

Make 10 piles of balls, in 2 lines with 5 piles in each line. Space the lines 5 to 10 yards or meters apart, and piles in each line about 4 yards or meters apart.

Place piles between 5 and 30 yards or meters from the hole, but not on the green.

On the green, mark 9 stop zones using buckets, string, or tees. Put them in a clear 3 by 3 layout.

Hit 36 chip shots, in 9 groups of 4 shots each.

For each group of 4 shots, pick one stop zone to aim at and chip 4 balls towards it from any pile.

Repeat until 4 shots have been aimed at each of the 9 stop zones, making 36 shots in all.

Count only shots that stop inside their chosen stop zone.

Enter the number of successful shots out of 36 in the app.

Set up three landing zones on the green in a line, 6 feet apart.

Make three piles of 12 balls each at the edge of the green.

Use the first pile to chip balls into the first landing zone, 12 shots.

Use the second pile to chip balls into the second landing zone, 12 shots.

Use the third pile to chip balls into the third landing zone, 12 shots. Count how many balls land and stay in each zone.

After all 36 shots, enter the number of successes out of 36 in the app.

Set up 4 rows of balls. Each row has 9 balls, 1 foot apart.

Space the rows 5 yards apart on grass, between 5 and 30 yards from the hole.

Put 3 targets by the hole: A at 12 o'clock, B at 4 o'clock, C at 8 o'clock, each 3 feet from the hole.

Split the 36 shots into 3 groups of

First 12 shots go to Target A, next 12 to Target B, last 12 to Target C.

From each row, chip the ball to try to stop it close to the chosen target. Ball setup does not change.

After 12 shots at one target, switch to the next target. Repeat until all 36 shots are finished.

Each ball that stops within 2 feet of the target is a success.

Count how many successes you had and enter your score in the app out of 36 attempts.

Set up 10 piles of 4 balls each in two rows (5 piles per row), spaced 2 yards/meters apart. Put the rows 5 to 10 yards/meters apart and place the piles 5 to 30 yards/meters from the hole.

Mark 9 stop zones on the green using buckets, string, or tees. Space them out so each zone is different.

Prepare to hit 36 chip shots, divided into 9 groups of 4 shots. Each group targets a different stop zone.

From any pile, hit 4 shots at the first stop zone. Move to the next stop zone and hit 4 shots at it. Keep going until you’ve aimed 4 shots at each of the 9 zones.

Count every ball that stops inside the right zone as a success.

When done, count up all successful stops out of 36 attempts and enter the score in the app.

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.