Pinpoint Chips for Tap-Ins

Set up 36 balls in 2 lines of 18 balls each, 5 to 10 yards apart, on grass 5 to 20 yards from the hole.

Mark 9 stop zones in a 3 x 3 grid on the green, spaced apart so the zones are clear.

Chip 4 balls to each stop zone, alternating between the two lines. For each zone, hit 2 balls from one line, then 2 from the other.

Keep doing this until you have hit 4 balls for each zone, for a total of 36 shots.

Count a shot as a success only if the ball stops in the right zone.

Add up the number of successes out of 36 attempts and enter the score in the app.

Arrange 10 piles of balls in two lines that cross each other. Each line has 5 piles. Each pile has the same number of balls.

Put the piles 5 to 30 yards from the hole. Leave 3 yards between piles in a line. Make lines 5 to 10 yards apart.

Set up 3 targets around the green. Each target is about 6 feet apart from the others.

There are 36 chip shots total, with 12 shots for each target.

Always use the same stance and ball position for every shot.

For each set of 12 shots, chip to the target from any pile. Try to get close to the target.

A shot is a success if the ball stops within 3 feet of the target.

After all 36 shots, add up how many balls stopped within 3 feet of the target and enter the score out of 36 attempts in the app.

Put 36 balls into 9 piles. Each pile has 4 balls. Put piles 5 to 30 yards from the hole.

Mark 9 target zones on the green.

Try to hit 4 balls into each zone. Do this for all 9 zones.

Always use the same ball setup. Only change which zone is the target.

Count each ball that stops inside the correct zone.

Add up all the successful shots out of

Enter score in the app, out of 36 attempts.

Set up 10 piles of 4 balls each in two rows (5 piles per row), spaced 2 yards/meters apart. Put the rows 5 to 10 yards/meters apart and place the piles 5 to 30 yards/meters from the hole.

Mark 9 stop zones on the green using buckets, string, or tees. Space them out so each zone is different.

Prepare to hit 36 chip shots, divided into 9 groups of 4 shots. Each group targets a different stop zone.

From any pile, hit 4 shots at the first stop zone. Move to the next stop zone and hit 4 shots at it. Keep going until you’ve aimed 4 shots at each of the 9 zones.

Count every ball that stops inside the right zone as a success.

When done, count up all successful stops out of 36 attempts and enter the score in the app.

Set up 10 piles of balls in two lines. Each line has 5 piles. The lines are 5 to 10 yards apart. Each pile in a line is 4 yards apart.

Put the piles 5 to 30 yards from the hole on any type of grass.

On the green, make 4 quadrants with string or tees. Each quadrant is about 6 feet wide.

Hit 36 chip shots. Hit 9 shots to each of the 4 quadrants.

Choose a pile and chip 9 balls, aiming for one quadrant.

After 9 shots, switch to the next quadrant. Do this for all 4 quadrants.

A chip that stops inside the right quadrant counts as a success.

After 36 shots, count how many balls stopped in the target quadrants and enter your score in the app out of 36 attempts.

Set up 10 piles of balls in two lines. Each line has 5 piles. Lines are 8 yards apart. Piles in each line are 3 yards apart.

Place the piles on grass between 5 and 30 yards from the hole. Keep the same setup.

On the green, mark 9 stop zones using buckets, string, or tees. Zones cover different short chip targets.

Take 36 chip shots in total. Chip 4 balls to each of the 9 zones.

For each shot, chip from any pile. Try to stop the ball in the assigned zone. Chip 4 balls to one zone before moving to the next.

Count each ball that stops in the correct zone as a success.

After 36 shots, count how many were successful. Enter your score out of 36 in the app.