Chip Through Gate for Aim

Set up 36 balls in 2 lines of 18 balls each, 5 to 10 yards apart, on grass 5 to 20 yards from the hole.

Mark 9 stop zones in a 3 x 3 grid on the green, spaced apart so the zones are clear.

Chip 4 balls to each stop zone, alternating between the two lines. For each zone, hit 2 balls from one line, then 2 from the other.

Keep doing this until you have hit 4 balls for each zone, for a total of 36 shots.

Count a shot as a success only if the ball stops in the right zone.

Add up the number of successes out of 36 attempts and enter the score in the app.

Pick a spot in the rough, on an uphill slope, 5–30 yards from the hole.

Put a target at the hole.

Hit 18 chip shots uphill, trying to stop the ball close to the hole.

Move to a downhill spot in the rough, also 5–30 yards from the hole.

Hit 18 chip shots downhill at the same target.

Every 4 shots, check the results and adjust if needed.

Count a success for every ball that finishes close to the hole (like within 3 feet).

Use the same setup for every shot.

After 36 shots, add up your total successes. Enter score in the app, out of 36 attempts.

Place 4 lines of 9 balls each on the grass. Lines should be 5 yards apart. Balls in each line should be 1 foot apart. Put the lines between 5 and 30 yards from the hole.

Mark two circles on the green around the hole: a small circle 6 feet from the hole, and a bigger circle 15 feet from the hole.

Hit 36 chip shots total: 9 shots from each line.

Try to make each ball stop inside the small 6-foot circle. Balls that stop in the big circle but outside the small one count as partial success.

Count each ball that stops in the small circle as a full success.

After all 36 shots, add up how many stopped in the small circle. Enter your score out of 36 attempts.