Pinpoint Chips for Tap-Ins

Set up 36 balls in 2 lines of 18 balls each, 5 to 10 yards apart, on grass 5 to 20 yards from the hole.

Mark 9 stop zones in a 3 x 3 grid on the green, spaced apart so the zones are clear.

Chip 4 balls to each stop zone, alternating between the two lines. For each zone, hit 2 balls from one line, then 2 from the other.

Keep doing this until you have hit 4 balls for each zone, for a total of 36 shots.

Count a shot as a success only if the ball stops in the right zone.

Add up the number of successes out of 36 attempts and enter the score in the app.

Set up 4 rows of balls. Each row has 9 balls, 1 foot apart.

Space the rows 5 yards apart on grass, between 5 and 30 yards from the hole.

Put 3 targets by the hole: A at 12 o'clock, B at 4 o'clock, C at 8 o'clock, each 3 feet from the hole.

Split the 36 shots into 3 groups of

First 12 shots go to Target A, next 12 to Target B, last 12 to Target C.

From each row, chip the ball to try to stop it close to the chosen target. Ball setup does not change.

After 12 shots at one target, switch to the next target. Repeat until all 36 shots are finished.

Each ball that stops within 2 feet of the target is a success.

Count how many successes you had and enter your score in the app out of 36 attempts.

Arrange 10 piles of balls in two lines that cross each other. Each line has 5 piles. Each pile has the same number of balls.

Put the piles 5 to 30 yards from the hole. Leave 3 yards between piles in a line. Make lines 5 to 10 yards apart.

Set up 3 targets around the green. Each target is about 6 feet apart from the others.

There are 36 chip shots total, with 12 shots for each target.

Always use the same stance and ball position for every shot.

For each set of 12 shots, chip to the target from any pile. Try to get close to the target.

A shot is a success if the ball stops within 3 feet of the target.

After all 36 shots, add up how many balls stopped within 3 feet of the target and enter the score out of 36 attempts in the app.

Make 9 stop zones on the green. Mark them with tees, string, or buckets. Line up or put them in a grid.

Put 36 balls in 4 rows. Each row has 9 balls, spaced 1 foot apart. Put the rows about 5 yards apart on the grass, between 5 and 20 yards from the green.

Plan to hit 4 balls at each of the 9 stop zones. That is 36 shots.

Start at any row of balls. Hit balls, trying to stop each one in the first stop zone.

After 4 tries at the first zone, go to the next zone and do the same. Keep going until you try all 9 zones.

Count a shot as a success if the ball stops completely inside the target zone.

When all shots are done, count the number of successful shots and enter the score in the app, out of 36 attempts.

Set up 3 landing zones on the green, 6 feet apart in a straight line.

Place 3 piles of balls around the chipping area, each pile randomly 5 to 30 yards from the hole. Keep this setup the same.

Divide 36 chip shots into 3 groups of

For the first 12 shots, aim for the first landing zone from any pile.

For the next 12 shots, aim for the second landing zone from any pile.

For the last 12 shots, aim for the third landing zone from any pile.

Count each shot that lands and stays in the correct zone as a success.

Total the successful shots out of 36 and enter the score in the app.

Mark 4 areas on the green with string or tees. Each area should be a circle about 6 feet wide.

Put 36 balls into 4 piles of 9 balls. Place the piles between 5 and 30 yards from the hole.

Hit 9 balls from each pile. Aim every group of 9 at a different circle.

Try to land each ball into the correct circle. Move to the next pile and repeat until all 36 balls are hit.

Count the balls that stop inside the correct circle.

Add up your successful shots out of 36 attempts and enter the score in the app.

Place 36 balls into 9 piles of 4 balls each. Arrange piles in two lines, with 4 in one line and 5 in the other, 5-10 yards apart and 2 yards between piles.

On the green, set up 3 landing zones side by side, 6 feet apart, using sticks, clubs, or string.

Hit 36 chip shots, 12 shots at each landing zone.

Hit 12 chip shots at the first landing zone from any piles.

Hit 12 chip shots at the second landing zone. Change piles if wanted.

Hit 12 chip shots at the third landing zone. Change piles if wanted.

Count a success each time the ball stays in the correct landing zone.

Add up all successful shots and enter score in the app out of 36 attempts.

Put 40 balls into 8 lines. Each line has 5 balls. Lines should be about 1 yard or meter apart. Put these lines anywhere on the grass 5 to 30 yards/meters from the hole but not on the green.

On the green, use sticks, clubs, or string to mark 3 landing zones in a straight line about 6 feet (2 meters) apart.

Divide the 36 chip shots into 3 sets of 12 shots.

For each set, pick 3 lines of balls and aim every shot at one landing zone.

Hit 5 chips from each line to the chosen zone. After 3 lines (15 shots), change zones until all 36 shots are done.

Count each shot that lands and stays in the target zone as a success.

Enter the total number of successful shots in the app, out of 36 attempts.

Set up 10 piles of balls in two lines. Each line has 5 piles. The lines are 5 to 10 yards apart. Each pile in a line is 4 yards apart.

Put the piles 5 to 30 yards from the hole on any type of grass.

On the green, make 4 quadrants with string or tees. Each quadrant is about 6 feet wide.

Hit 36 chip shots. Hit 9 shots to each of the 4 quadrants.

Choose a pile and chip 9 balls, aiming for one quadrant.

After 9 shots, switch to the next quadrant. Do this for all 4 quadrants.

A chip that stops inside the right quadrant counts as a success.

After 36 shots, count how many balls stopped in the target quadrants and enter your score in the app out of 36 attempts.