Pinpoint Chips for Tap-Ins

Put 40 balls into 10 piles with 4 balls in each pile. Arrange in two lines, 5 piles per line.

Space piles 2 yards or meters apart side to side. Space the two lines 5 to 10 yards or meters apart front to back.

Mark 4 sections (quadrants) in a circle of 6 feet or 2 meters radius around the hole on the green using string or tees.

Hit 36 chip shots total, 9 shots into each quadrant.

Start at any pile and chip balls to land in the first quadrant. After 9 shots, switch to the next quadrant.

Switch piles after each shot for variety, but always keep the same chipping setup and distance.

Count each ball that stops inside the correct quadrant as a success.

After all 36 shots, enter number of successful shots made out of 36 attempts.

Set up three landing zones on the green in a line, 6 feet apart.

Make three piles of 12 balls each at the edge of the green.

Use the first pile to chip balls into the first landing zone, 12 shots.

Use the second pile to chip balls into the second landing zone, 12 shots.

Use the third pile to chip balls into the third landing zone, 12 shots. Count how many balls land and stay in each zone.

After all 36 shots, enter the number of successes out of 36 in the app.

Set up 10 piles of balls in two lines. Each line has 5 piles. The lines are 5 to 10 yards apart. Each pile in a line is 4 yards apart.

Put the piles 5 to 30 yards from the hole on any type of grass.

On the green, make 4 quadrants with string or tees. Each quadrant is about 6 feet wide.

Hit 36 chip shots. Hit 9 shots to each of the 4 quadrants.

Choose a pile and chip 9 balls, aiming for one quadrant.

After 9 shots, switch to the next quadrant. Do this for all 4 quadrants.

A chip that stops inside the right quadrant counts as a success.

After 36 shots, count how many balls stopped in the target quadrants and enter your score in the app out of 36 attempts.

Place 36 balls into 9 piles of 4 balls each. Arrange piles in two lines, with 4 in one line and 5 in the other, 5-10 yards apart and 2 yards between piles.

On the green, set up 3 landing zones side by side, 6 feet apart, using sticks, clubs, or string.

Hit 36 chip shots, 12 shots at each landing zone.

Hit 12 chip shots at the first landing zone from any piles.

Hit 12 chip shots at the second landing zone. Change piles if wanted.

Hit 12 chip shots at the third landing zone. Change piles if wanted.

Count a success each time the ball stays in the correct landing zone.

Add up all successful shots and enter score in the app out of 36 attempts.

Set up 10 piles of 4 balls each in two rows. Each row has 5 piles.

Keep piles about 2 meters apart, rows 5–10 meters apart.

Place piles 5–30 meters from the hole, not on the green.

Mark two circles around the hole on the green: a small one (2 meters out) and a big one (5 meters out).

Take turns hitting balls from different piles, trying to stop balls in the circles.

Hit 36 balls total: 18 try for the small circle, 18 for the big circle.

Count how many balls finished in each circle.

Add these for a score and enter your total out of 36 tries.

Set up 10 piles of 4 balls each in two rows (5 piles per row), spaced 2 yards/meters apart. Put the rows 5 to 10 yards/meters apart and place the piles 5 to 30 yards/meters from the hole.

Mark 9 stop zones on the green using buckets, string, or tees. Space them out so each zone is different.

Prepare to hit 36 chip shots, divided into 9 groups of 4 shots. Each group targets a different stop zone.

From any pile, hit 4 shots at the first stop zone. Move to the next stop zone and hit 4 shots at it. Keep going until you’ve aimed 4 shots at each of the 9 zones.

Count every ball that stops inside the right zone as a success.

When done, count up all successful stops out of 36 attempts and enter the score in the app.

Make 10 piles of 4 balls each from 40 balls. Arrange the piles in 2 lines with 5 piles in each line. Lines cross each other.

Put the piles on grass 5 to 30 yards/meters from the hole. Space lines 5 to 10 yards/meters apart and piles 2 yards/meters apart.

On the green, put 3 targets in a line, about 8 feet apart. Call them Target A, Target B, and Target C.

Hit 36 chip shots, 12 to each target.

Hit 12 shots at Target A, then 12 at Target B, then 12 at Target C. Use any pile for any shot.

Count a shot as a success if it stops within 10 feet of the target.

After all 36 shots, add how many were successful and enter the score in the app, out of 36 attempts.

Arrange 10 piles of balls in two lines that cross each other. Each line has 5 piles. Each pile has the same number of balls.

Put the piles 5 to 30 yards from the hole. Leave 3 yards between piles in a line. Make lines 5 to 10 yards apart.

Set up 3 targets around the green. Each target is about 6 feet apart from the others.

There are 36 chip shots total, with 12 shots for each target.

Always use the same stance and ball position for every shot.

For each set of 12 shots, chip to the target from any pile. Try to get close to the target.

A shot is a success if the ball stops within 3 feet of the target.

After all 36 shots, add up how many balls stopped within 3 feet of the target and enter the score out of 36 attempts in the app.

Place 36 balls in two lines that cross, with 18 balls in each line.

Keep the balls about 1 foot apart, with lines set up 5 to 30 yards from the hole.

On the green, divide a 6-foot circle around the hole into 4 equal parts.

Split the 36 chip shots into 4 groups of 9 balls.

Aim the first 9 shots at the first part of the circle.

Switch to the other line and aim the next 9 balls at the second part. Keep switching lines and aim at the next parts until all 36 balls are chipped.

Count how many balls land in the right part each time.

Enter the number of successful chips out of 36 attempts in the app.